Style – 120  Three-In-One Base Clip

• This view shows how it is so simple to install by clipping onto the pad by hand.
• See Dimensions here

Style – 220 Panel Clip Extension

• Used with the base clip (style 120), to hook over a wall panel. Place into keyhole shape of basic clip and twist to secure.
• See dimensions here.

Style – 320 Ceiling Clip Extension

• Used with the base clip (style 120), to hang over a dropped ceiling. Place into the keyhole shape of the basic clip and twist to secure. Compatible with Snap-Cab channel system.
• See dimensions here.

*NEW* Style 125 – Patented “The Ultimate Loop Hole” ^®

THIS IS AN EXAMPLE SHOWN WITH “C” HOOK OPTION 

• Our revolutionary patented loop system allows you to hang any padding in any elevator with any type of hook.
• Our continuous 3/4″ industrial-strength loops are double-stitched along the back top edge of the pads and virtually invisible from the front.
• No need to measure spacing for wall studs.
• “The Ultimate Loop Hole” ® can be used with wall studs, panel or ceiling hooks. (see example in picture used with a C hook).
• Comes In: Black

Style 400x – 1.25″ Stud Length & Style 400xx – 2″ Stud Length

• May be screwed either directly into the elevator interior wall or bolted through the cab wall to support either grommets, eyelets, clamps or loop hanging solutions.
• Also available as one piece unit.  Not recommended for wood
• 1.25″ length comes in brass and aluminum.
• 2″ length comes in chrome.

Style 400 M – Magnetic Wall Stud Base

• This magnetic base is to be used with either a 5/8″, 1.25″ or 2″ length wall stud. 
• Mounts firmly on magnetic surface to hang pads. 
• Hang with grommet, loop, eyelet or clamp; temporarily or permanently.
• Can remain in place or be removed and used as needed.
• Comes In: Chrome

Style 400 AH – Adhesive Wall Hook

• This self-adhering hook is permanent and can be applied to most elevator interior surfaces.
• Pads hang from the 1.25” long stainless steel hook with 2″ circular base plate.
• Also available in Stud version.
• By using a high-strength bonding tape that creates a permanent hold, Adhesive Wall Hooks eliminate the need for installing studs.
• Comes In: Brushed Nickel

Style 400 RH – Removable Wall Hook

• This removable wall hook holds securely and removes cleanly.
• Pads can be hung without installing permanent wall studs.
• Simple mount base plate with Command ™ adhesive strip, then slide the hook over it.
• Used with grommet, clamp, eyelet or loop.
• Comes In: Brushed Nickel.

Style O370-6s – Ceiling S-Hook

• Upper half of round S-Hook engages wall, vent or suspended ceiling grid.
• Use with grommet, clamp, eyelet or hanging loop.
• Six inches long.
• Comes In: Silver

Style 350 – Ceiling Hanging Clamp

– Being Discontinued Soon –

• Universal spring steel clamp clips to top of pad and engages suspended ceiling grid.
• Simply squeeze, position, release and hang pads.
• Comes In: Grey

Style 600 – Combination Ceiling Hook

• The upper half of this C-Hook engages with a suspended ceiling grid. This combination hook clips behind wherever needed.
• Crimps to secure under webbing.
• Comes In: Black

Style 700 – C-Hook

• The upper half of this C-Hook engages with a suspended ceiling grid.
• 2” or 4” long.
• Use with grommet, clamp, eyelet or hanging loop.
• Comes In: Black

Style 800 – Suction Cup

• This suction cup attaches securely to any smooth, clean tile, mirror or glass surface.
• Easy application and removal.

Style 900 – Pad Anchor

• This flexible rubber anchor fits snugly over wall studs to keep pads secure and in place while hanging on wall studs.
• Comes In: Black

Style 850 – Tension Rod

• Pads hang from removable, spring tension rod.
• Round pole adjusts up to 86″.
• Use one rod per wall.
• Used with Style 300 – Ceiling S-Hook.